UV/LED Curing Systems | Master Bond
UV curable and LED curable systems are fast curing adhesives, sealants, coatings, potting and encapsulation compounds that speed productivity and efficiency. They offer excellent adhesion to glass, metals, ceramics, rubber and most plastics. These one part products require no mixing and eliminate waste. Formulations are solvent free and contain no volatiles. UV curable compounds typically cure in a matter of seconds when exposed to a suitable UV light source.
UV Curable Systems
 |
UV curable adhesive/sealant/encapsulant. Meets NASA low outgassing requirements. High viscosity. Excellent clarity. Rapid cure speed. |
 |
A special dual cure epoxy system allowing curing in "shadowed out" areas. Cures at 80°C. Bonds well to various substrates. |
 |
One component, high strength, optically clear UV curable adhesive/sealant. Enhanced chemical resistance. Superior physical strength properties. Fast curing. |
 |
Medium viscosity UV system with high flexibility, excellent toughness, abrasion resistance. For bonding, sealing, coating, and encapsulation. Passes USP Class VI testing for medical device assembly. |
 |
One component, nanosilica filled, dual cure system with UV and heat curing. Low viscosity, minimal shrinkage upon cure, optically clear. Cures at 80°C in shadowed areas. |
LED Curable Systems
 |
Flexibilized, LED curable system can cure up to 6mm deep or in cross-section. Can be used for side bonding. Electrically insulative, withstands thermal cycling, mechanical shock, and vibration. |
 |
Biocompatible, nanosilica filled LED curable adhesive meets ISO 10993-5 cytotoxicity requirements for medical device assembly. Optically clear, sterilization resistant, rapid cures. |