26 Sep 2013 SI's 1110S camera is designed to accommodate the very large area multi-port single-chip CCD sensors in the market today. The 100+ ports in a cryo cooled dewar so the requirements of the most demanding scientific applications can be exceeded. It provides device-limit performance in a very compact configuration.
- Cooling: The 1100 can cool CCDs below –100°C by crycooling and is available with thermoelectric cooling as well.
- Multiple read speeds are available: Common readout speeds start at 100kHz per port, and can achieve MHz speeds (per port) as well
depending on the CCD selection.
- Low read noise: sub 5e-RMS noise performance. Low noise and high pixel full-well with 16-bit digitization provides large dynamic range performance.
- Multi-port readout: Up to 16 outputs are supported.
- Sensors available: The 1100 is designed to accommodate multi-port (>4 ports) CCD which includes the 10k x 10k 16-port 9μm pixel sensor from STA and the 9k x 9k 10μm pixel CCD from e2v.
- Binned imaging: Serial and parallel binding, for reduced area and high speed is provided.
- Shutter: The camera incorporates an internal flexible shutter drive that can be used with a variety of common shutters. Outputs are also available that can signal an external shutter driver.
- Trigger: Dual trigger inputs can be configured for a variety of operations, such as expose and read on trigger or shift line and read for externally paced TDI readout
- Fiber optic communication: Fiber optic cable to a computer through a proprietary PCI or PCIe card is provided
|
